ULTRASONIC MACHINING

Ultrasonic machining is a process wherein a vibrating tool oscillates at 

ultrasonic frequencies and removes material from the

workpiece, aided by an abrasive slurry which flows freely

between the workpiece and the tool.

Specifications

Ultrasonic power

3 KW

Frequency

20 KHz

Amplitude

Selectable for range of amplitude 

100 / 90 / 80 / 70%

Load Capacity

High contact force of 3000N at 7 

Bar with least possible friction

Horn

Ultrasonic Drilling Horn with Tips of 

1mm, 1.5mm, 3mm, 5mm, 10mm

Slurry System

Compact slurry system with pump,

slury flow control manual valve,

flexible hose,sump tank & activity 

tank with protective cover.

Supplied with three different

abrasive of approximate size

of 100, 150, 200, 250 microns.                                                            

Protection

Automatic overload and overheating

protection.

Voltage control

Supplied with suitable Servo Stabilizer.

 

Advantages

  • Very less heat is produced.

  • Any hard material can be machined.

  • Good surface finish.

  • Higher structural integrity is achieved.